FujiFilm 4500N - Manual (Page 35)

26
3.3 Printing
1 . Use the host computer to enter the image data to be printed
on the Pictrography 4500N (in online condition).
★ When the entered image data is sent from the host
computer to the Pictrography 4500N, the DATA indicator
lamp starts blinking.
★ When image data reading is completed, the message
changes to "Data Busy" and the machine starts printing.
NOTE: Processing does not start while the machine is warming up.
During cold seasons such as winter, it may take time to print
out the first copy.
★ When the printing operation has progressed to a certain
point, the message returns to "Data Ready" and data
entry becomes enabled again.
3.3.1 Communication Error Display (for ONLINE operation)
When a communication error occurs during an ONLINE
operation, the error code is displayed to the right of the
message.
Error Code Display
● Net ... C103 to C107
(For a description of errors, see page 111.)
■ Press the ONLINE key.
★ The machine switches from online condition to offline
condition.
★ The message changes to "Utility".
NOTE: When printing is in process, however, the message changes
to "Wait (Processing)".
■ Press the ONLINE key again.
★ The machine switches from offline condition to online
condition and the message changes to "Data Ready".
ON LINE
DATA
Data Busy 400
LL/DP-W GLOSSY THICK
Data Ready400 C103
Reset ONLINE Key
Data Busy400
LL/DP-W GLOSSY THICK
ON LINE
Data Ready400
LL/DP-W GLOSSY THICK
Utility
ON LINE