FujiFilm 4500N User Manual
Page 38
29
3
OPERA
TING PR
OCDURES
6
.
Take out the core from the donor magazine and adjust the
partition to the size of the donor being used.
The size of the donor corresponds to the size of the receiver,
as shown in the table below.
Size of donor
Corresponding size of receiver
323mm
315 mm (Double Letter Wide,etc.)
305mm
279 mm (Double Letter and Letter)
262mm
254 mm (10 x 12 and 10 x 8)
135mm
127 mm (4R and 5R,etc.)
NOTE:
Use the proper combination of donor and receiver. Do not use
combinations other than those above. If you do, the message
"Warning Check Magazine Type" appears.
7
.
Take out the donor roll along with the light-blocking leader
out from the casing and insert the plastic flanges into the
right-hand and left-hand sides.
8
.
Insert the donor roll into the donor replacement magazine
for which the partitions were set in step 5.
3.4 Donor Magazine Replacement
323mm
305mm
262mm
135mm
Partition