Freedom9 4020 - Manual (Page 53)

freeStor 4020 User’s Manual
46
Figure 3-26: System Page
Using the System page, you can also change the administrator name and password to use for
logging in to the Manager.
To change any of the system settings, make the desired changes, then click “Apply” and then
click “OK” when the confirmation message appears.
The options available are:
Storage system name: The name of the freeStor 4020 used on the network. This name can be
up to 15 characters long and can include letters, numbers, and hyphens. In Active Directory
authentication mode, you cannot change the storage system name.
Date: The current date.
Time: The current time.
Time zone: The local time zone.
NTP server name or IP address: If using an NTP (Network Time Protocol) server to set the
time, enter its IP address here. You can use a name only if it is resolvable.
Administrator name: The name used to log into the web interface.
Password: The password used to log into the web interface.
Confirm password: If changing the password, must match the password entered in the
Password textbox.