Freedom9 4020 - Manual (Page 77)

freeStor 4020 User’s Manual
70
3. When the Add Storage System dialog box appears, DiskSafe Express automatically scans
your subnet for storage systems. Any storage systems that are detected appear in the
Discovered Storage Systems List (Figure 4-9).
Figure 4-9: Add Storage System Page
From the Discovered storage systems list, select the storage system where you want to
back up the selected disk. The name of the storage system automatically appears in the
Storage system name or IP address text box.
If no storage systems are automatically discovered, or if you want to back up your disk to a
different storage system, enter the name or IP address of the desired storage system in the
Storage system name or IP address text box. Click “OK”.
Note: If an authentication error occurs, make sure the name or IP address of the
storage system is correct, and that your computer is connected to the network.
4. From the Backup locations list (Figure 4-10), select the storage system to use for backups of
this disk or partition. (The first backup location in the list is selected by default.)
Figure 4-10: Storage System Selection Page
If you want to scan the network for new storage systems, or add a new one manually, click