Freedom9 4020 - Manual (Page 74)

67
you receive confirmation that your license has been re-activated, you can
continue to use the product.
Activating your license without an Internet connection
If your license wasn’t activated because your computer has no Internet connection, you must
obtain an activation code using another computer that does have both an Internet connection
and e-mail.
To activate your license without an Internet connection:
1. From the Action menu, click License Æ Offline Activation to open the Offline Activation dialog
box.
2. Click “Export License Data”.
3. On the Save As dialog box, select one of the following locations and then click Save:
• A shared folder accessible to both your computer and a computer that has Internet and
e-mail access
• A floppy disk
• A USB disk
4. If you did not save the file to a shared folder, take the floppy disk or USB disk to a computer
with Internet and e-mail access. If you used a shared folder, access that folder from a
computer with Internet and e-mail access.
5. From the computer that has Internet and e-mail access, e-mail the license file to the
following address: “[email protected]”.
6. When you receive an e-mail response, save the returned license file back to the shared
folder, floppy disk, or USB disk.
7. If you did not save the file to a shared folder, take the floppy disk or USB disk back to the
computer where DiskSafe Express is installed. If you used a shared folder, access that
folder from the computer where DiskSafe Express is installed.
8. From the Action menu, click License Æ Offline Activation.
9. Click “Import Activation Code”.
10. On the Open dialog box, browse to the location where the returned license file exists and
double-click it.
11. On the confirmation message, click “OK”.
12. The license is now activated and you can continue to back up and recover your disks.
13. To Close the dialog box, click “Exit”.
Replacing your existing license
To replace your existing license:
1. From the Action menu, click License Æ Add License.
2. The Add License dialog box displays your current license key code.
3. In the License key code text box, enter the new key code.