Freedom9 4020 - Manual (Page 82)

75
Figure 4-14: DiskSafe Express Schedule Page
2. In the Protected disk list, select the disk whose backup schedule you want to change.
3. Specify when you want backups to occur.
4. For example, if you want backups to occur every day, select Daily from the Recurrence list.
If you want backups to occur once a week, select the day of the week from the Recurrence
list. Then select the time.
5. If you don’t want backups to occur automatically, select Not Scheduled from the Recurrence
list. (The Time list appears dimmed.) Backups will occur only when you start one manually
(as described in Manually backing up your disk).
6. Click “Apply”.
7. The schedule change takes effect immediately, and the date and time of the next scheduled
backup appears in the Next backup area.
4.2.10 Receiving Event Notifications
When you install DiskSafe Express, the DiskSafe Express Agent is also installed. This program
starts automatically whenever you start your computer, and the Agent icon appears in your
system tray. When the Agent is running, a pop-up message appears whenever a backup-
related problem occurs (for example, if a scheduled backup did not occur because the storage
system was not running). You can close the Agent at any time. However, if you do this,
notifications will no longer appear automatically. If you subsequently want to start the Agent
again, you can do so using DiskSafe Express.
To close the Agent, right-click the Agent icon in the system tray and click Exit DiskSafe Express