Garland MP-GD-10-S - Manual (Page 45)

Part # MPSM07 (03/24/08) Page 45
• If the actual temperature inside the oven exceeds the
set temperature by 50°F, the display will show “HI TEMP”
and the alarm will sound . The fan will continue to run,
however, power to the heaters will be cut .
• If the actual temperature sensed inside the oven exceeds
575°F, the control will change to “HELP” and the alarm will
sound continuously . All control operations will shut down
except the alarm .
• NOTE: The control will need a complete power down and
restart (unplug/plug in oven) before any control functions
will become operational . If the problem persists, contact a
service technician .
• In the event of a temperature probe failure, the control
will become inoperative and the display will show “PROBE
ERROR” . Once the problem is corrected, the control must
be cycled On/Off (using the ON/OFF key) in order to
become operative again
DIAGNOSTIC PROCEDURES