GE GFK-2489 - Manual (Page 130)

5-16 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
5
Press B to set the Data Byte Format. Press SPACE to cycle through the byte format
options until “8N1” is displayed. Press ENTER to accept the Data Byte Format. Then
press N to continue.
Serial Configuration Wizard Menu
Please choose appropriate baud rate and byte format
to be used while sending all of the serial data.
A) Data Baud Rate 19200
B) Data Byte Format 8N1
B) Continue Wizard
Select a letter to configure an item, <ESC> for prev menu, ‘Q’ to quit wizard
11. The next screen prompts for the data buffer size and inter-packet frame delay.
Press A to select Buffer Size. Press SPACE to cycle through the buffer size options until
“256” is displayed. Press ENTER to accept the Buffer Size.
Press B to select Inter Frame Delay. Press SPACE to cycle through the options until “4
Character Times” is displayed. Press ENTER to accept the Inter Frame Delay. Then press
N to continue.
Serial Configuration Wizard Menu
Please choose the appropriate value for the Buffer Size
and the Inter-Frame Delay between each serial message.
A) Buffer Size 256 Bytes
B) Inter-Frame Delay 4 Character Times
B) Continue Wizard
Select a letter to configure an item, <ESC> for prev menu, ‘Q’ to quit wizard