GE GFK-2489 - Manual (Page 69)

3-36 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
3
Wireless Network Menu
The Wireless Network Menu monitors the operation of Remote radios in the network,
regardless of the type of data they are passing (Ethernet or serial) from the perspective of the
AP. This information is stored in a local database at the AP, and is not sent to the Remotes.
Wireless Network Menu
A) Database Timeout 10 minutes
B) Max Remotes 100
C) Remote Management
D) Remote Database
E) EndPoint Database
F) Access Point Database
G) EndPoint Logginc
enabled
Select a letter to configure an item, <ESC> for the prev menu
▪ Database Timeout —Number of minutes until a database entry expires. Remotes must be
refreshed through a handshake process to stay in the database. This allows
decommissioned or faulty radios to fall out of the database.[1-720; 10]
▪ Max Remotes —Maximum number of Remotes allowed to associate with the AP.[1-
1024;100]
▪ Remote Management —Presents a menu for management of a particular Remote. See
Remote Management Submenu below for more information.
▪ Remote Database —A listing of all Remotes connected with the AP. See Remote
Database Menu below for more information.
▪ Endpoint Database —Lists the IP or MAC addresses of Ethernet endpoints connected to
Remote radios. See Endpoint Database Menu below for more information.
▪ Access Point Database —Lists the APs in the wireless network (IAPP must be enabled
as explained previously for this function to work.) Inter-Access Point Protocol (IAPP) traffic
can be passed via these transceivers. See Access Point Database Menu below for more
information.
▪ EndPoint Logging —This selection is used to specify whether endpoint logging is enabled
or disabled [Enabled, Disabled; Enabled]