GE GFK-2489 - Manual (Page 97)

GFK-2489 Chapter 4 Remote Radio Management
4-3
4
Minimum Configuration for Remotes
Remote radios require little configuration to operate, as most of the configuration is conducted
at the AP. The minimum set of parameters that needs to be set for a Remote are:
RADIO UNIT—32-bit radio address. Defaults to the radio serial number, but is
settable.
RADIO NETADDR—Radio network address. Must match the AP address.
RADIO PWR —RF output power setting in decibels (dB). The range is 20-30 for non-
ETSI 900 MHz radios, 20-27 for non-ETSI 2400 MHz radios, and 10-20 for ETSI 2400
MHz radios.