GE GFK-2489 - Manual (Page 81)

3-48 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
3
Event Log Menu
The microprocessor within the transceiver monitors many operational parameters and logs
them. Events are classified into four levels of importance, which are described below. Some
of these events result from a condition that prevents the normal operation of the radio—these
are “critical” events. These cause the radio to enter an “alarmed” state, and the POWER LED
to blink, until the condition is corrected. All events are stored in the Events Log, which holds
about 5,000 entries.
Event Classifications
Level Description or Impact
Informational Normal operating activities
Minor Does not affect radio operation
Major Degraded radio performance, but still capable of operation
Critical The radio cannot operate
Time and Date Stamping
The events stored in the Event Log are time stamped using the time and date. You must
manually enter the date and time at the AP. (See Device Information Menu.) The manually set
time and date clock is backed up by an internal battery.
Event Log Menu
A) Current Alarms
B) View Event Log
C) Clear Event Log
D) Send Event Log
E) Event Log Host Address 0.0.0.0
F) Event Log Filename eventlog.txt
G) TFTP Timeout 30 sec
H) Syslog Server Address 127.0.0.1
Select a letter to configure an item, <ESC> for prev menu
▪ Current Alarms (Telnet or Terminal only)—Lists events that have placed the radio in the
alarmed state.