GE GFK-2489 - Manual (Page 57)

3-24 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
3
Local Serial Configuration Menu
Local Serial Configuration Menu
Com1 Com2
A) Port Status: disabled
C) Port Status: enabled
B) Serial Config. Wizard D) Serial Config. Wizard
Select a letter to configure an item, <ESC> for the prev menu
▪ Port Status
(COM1, COM2)—Defines whether the specified port is enabled or disabled to
pass payload data. COM1 is typically disabled to allow it to be used for console terminal
control.
If COM1 is inadvertently enabled, it will become impossible to log in using a console
terminal connected to the COM1 connector. This problem can be remedied by typing the
Hayes modem-compatible escape sequence of SHIFT + + + followed by ENTER . This
restores COM1 to console terminal mode. You must log in again.