GE GFK-2489 - Manual (Page 27)

2-6 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
2
Step 3—Configure the Access Point
The instructions below summarize essential Access Point (AP) settings for tabletop t esting.
For detailed AP log-in and menu navigation instructions, see Accessing the Menu System in
chapter 3.
Log-in and Configuration
The AP must be configured first, as Remote transceivers depend on the AP beacon signal to
achieve a connected (linked) state. The illustration below shows the basic setup for
configuring an AP with a personal computer.