GCC Printers Elite 12ppm - Manual (Page 112)

9-12
A dialog box appears with two options: “Initialize all disks” and “Initialize some disks”. If
you click the button next to “Initialize all disks”, the boxes next to the SCSI ID numbers are
dimmed (A). This option will initialize all hard disks attached to the printer’s SCSI chain. If
you click the button next to “Initialize some disks”, the check boxes representing the SCSI
ID numbers of any hard disks connected to the Elite 12ppm are highlighted: (B) shows an
external hard disk at SCSI ID 1.
A B
If you are attaching more than one hard disk to the printer, we recommend that you always
use the “Initialize some disks” option, and that you initialize each hard disk separately
before chaining them together.
4. Click the button labeled Initialize some disks.
5. Click the box next to the SCSI ID of the first hard disk to be initialized.
An X appears in the box and the Initialize button becomes active.
6. Click Initialize.
A dialog appears asking if you really want to initialize this hard disk. Click OK to proceed,
or click Cancel. A progress status box appears.
7. Click OK.
If the initialization fails, repeat the initialization steps. If the initialization was successful,
repeat the steps for each additional hard disk.
8. Use the LaserWriter Utility to download fonts to the hard disk(s).