GCC Printers Elite 12ppm - Manual (Page 91)

7-8
3. Go to the File menu in the Printers window, and choose Document Defaults
from the menu.
GCC-specific items
There are several items (depending on the
product you have installed) in the Docu-
ment Defaults dialog box which are added
when you install a GCC printer. You’ll find
them if you click on the Advanced tab and
scroll to the bottom of the window.
• AccuGray is GCC’s technology for
improving the reproduction of
photographs. We recommend that
you leave this at the default setting of
Enabled.
• TonerMiser (Elite 1212 only) lets you
use less toner when printing drafts of
a document for proofing.
• Smoothing (Elite 1212 only) reduces
the jagged appearance of text and
graphics.
• The Output Tray option allows you to select the default output location, either TOP
(face down) or REAR (face up).
Other items in the Advanced page
Most of the items in Document Defaults control what will be the defaults in the Page Setup
and Print dialog boxes in your applications. Any changes you make will override the
settings in the printer’s control panel for this computer only.
If you are constantly making changes in these dialog boxes, you may find that you can
avoid this by making changes in the Paper/Output and Graphic section. The new settings
will then become the defaults in applications. Note that the Graphic section applies to the
whole document and not just to any graphic images within documents.
We recommend that unless you need to change paper sizes and paper sources, you should
leave these settings at their defaults. However, you may want to change the Resolution
setting (see next section).