GCC Printers Elite 12ppm - Manual (Page 149)

D-2
3. Unpack the 500-sheet feeder and remove all
packing. Check that you have the sheet feeder,
the 500-sheet paper tray, and four locking
clips.
4. If you’re working alone, place the sheet feeder
next to the printer with the curved cover to
the front. If you have help, one person should
lift the printer up while the other puts the
sheet feeder into place.
6. Fit the locking clips at the left and
right front of both units.
7. Fit the locking clips at the left and
right rear of both units.
5. Lower the printer onto the sheet feeder. If
you align the front right corner of each part,
you’ll find that the printer will locate on the
three posts on the sheet feeder.