GCC Printers Elite 12ppm - Manual (Page 124)

10-11
The next line of text starts below the end of the previous line (stairstep effect):
• Change the Line Termination submenu item to LF=CRLF;FF=CRFF.
Diagnosing errors from print output
“Recommended paper” in these examples is 20-pound (75 g/m 2 ) copier-type paper.
The print is light or faded:
• Moisture in paper – load fresh, dry paper.
• Print density is incorrectly set – adjust the print density
• Toner cartridge is low on toner – replace toner cartridge
• Toner cartridge is damaged – replace toner cartridge
Toner spots are randomly scattered across the page:
• Paper doesn’t meet specification – use recommended paper
• Toner cartridge is damaged – replace toner cartridge
Repeating marks spaced evenly on page:
• Paper path is dirty – print some blank sheets to clear the paper
path
• Toner cartridge is damaged – replace toner cartridge
Light or faded areas within the print:
• Transfer roller smudged – print some blank sheets of paper
• Moisture in paper – load fresh, dry paper
• Paper doesn’t meet specification – use recommended paper
Light or faded vertical bands running through print:
Data sent to printer
Press the ON-LINE button to
take the does not print, but
printer off-line, then press the
FORM FEED DATA PRESENT
button to eject the final page or
send the message appears.
Form feed code (decimal
character 12). Last page of
Press the ON-LINE button to
take the does not print, but
printer off-line, then press the
FORM FEED DATA PRESENT
button to eject the final page or
send the message appears.
Form feed code (decimal
Data sent to printer
Press the ON-LINE button to
take the does not print, but
printer off-line, then press the
FORM FEED DATA PRESENT
button to eject the final page or
send the message appears.
Form feed code (decimal
character 12). Last page of
Press the ON-LINE button to
take the does not print, but
printer off-line, then press the
FORM FEED DATA PRESENT
button to eject the final page or
send the message appears.
Form feed code (decimal
Data sent to printer
Press the ON-LINE button to
take the does not print, but
printer off-line, then press the
FORM FEED DATA PRESENT
button to eject the final page or
send the message appears.
Form feed code (decimal
character 12). Last page of
Press the ON-LINE button to
take the does not print, but
printer off-line, then press the
FORM FEED DATA PRESENT
button to eject the final page or
send the message appears.
Form feed code (decimal
Data sent to printer
Press the ON-LINE button to
take the does not print, but
printer off-line, then press the
FORM FEED DATA PRESENT
button to eject the final page or
send the message appears.
Form feed code (decimal
character 12). Last page of
Press the ON-LINE button to
take the does not print, but
printer off-line, then press the
FORM FEED DATA PRESENT
button to eject the final page or
send the message appears.
Form feed code (decimal