GCC Printers Elite 12ppm - Manual (Page 70)

5-11
• Press the Enter key, type exit and press the Enter key again to close the DOS win-
dow.
The printer will produce a page which shows the maximum available virtual
memory and the maximum suggested virtual memory. Use the suggested value
(
Max Suggested VM ).
2. Enter the new suggested value into the Device Options page in the box labeled
Available printer memory (in KB).
The Details page
You can change the printer driver and port settings in the Details page.
The Paper page
You can change paper sizes, layout, orientation, and
paper source in the Paper page. Any changes you make
will override the settings in the printer’s control panel
for this computer only.
Paper size
You can set a default paper size by picking a new setting
in the paper size box. You can scroll to the right of this
box to see more paper sizes. Click on the icon of the
paper size you want to be the new default.
Only the first few characters of the name of the paper
size are shown beneath each icon. If you click on an icon
you’ll see the full name above the box. However, the
paper size you click on will now be the default, unless you click on another paper size icon
or click on the Cancel button at the bottom of the dialog box.
Paper source
You can set a default paper source by choosing from the Paper source drop-down
list box. These options specify how paper will be provided to the printer. There are selec-
tions for:
• Auto Select.
• Any installed paper trays.
• Manual feed.
• The multipurpose feeder.
We recommend that you leave other features at their default settings.