GCC Printers Elite 12ppm - Manual (Page 18)

1-11
Loading paper into the tray
Note: Place letterhead paper face down
and with the letterhead toward the front
of the tray.
1. Remove the paper tray from the
printer. Pull firmly using the
handle at the front of the tray.
2. Adjust the guides at the rear of
the paper tray to accommodate
the length of the paper you
intend to use. Adjust the smaller guide at the left (A) to accommodate paper up
to A4 size. For sizes larger than A4, extend both of the guides (B).
3. Make sure that the paper fits underneath the plastic tab at the rear of the tray
and under the metal bracket at the front (C).
4. Place the paper in the paper tray and move the paper width guide (D) so that it
lies next to the paper. Don’t move the guide so close that it holds the paper
tightly, because this may cause jams.
C
A B
D
A4
8.5 X 11"
7 1/4 X 10.5"
B5
A
8.5 X 13"
8.5 X 14"
B C
D