GCC Printers Elite 12ppm - Manual (Page 24)

1-17
• (1200 dpi model only) 10BASE-2 (RG-58, Thin Coax, or Thinnet)
Your printer connects to 10BASE-2 Ethernet via the 10BASE-2 (BNC) connector on the
network card. The cabling used is called RG-58 or Thin Coax.
Supported network protocols
• EtherTalk
EtherTalk is Apple’s name for the AppleTalk network protocol running over Ethernet
cabling.
• NetWare
NetWare is Novell’s system for Ethernet connection.
• TCP/IP
TCP/IP is a networking protocol used by various vendors of network software.
If you need to know more about these protocols, refer to the Networking Guide on this
CD-ROM. You’ll also see how to connect your printer to make it available on other net-
works such as those running Windows for Workgroups 3.11, Windows 95, and Windows
NT.