GCC Printers Elite 12ppm - Manual (Page 28)

2-4
If you want to reset just one submenu to the default settings, navigate through the
menu system until you see the submenu you want to reset. Hold down the Cancel/
Reset button for five seconds. Because you are resetting only one item, you won’t be
prompted to confirm or cancel this change.
Note: Some items will not reset until you switch the printer off and on again.
Menu key
You use the Menu key to get to the menu system. First, you must press the On Line key.to
take the printer off line. You can only get to the menu system when the printer is off line.
You’ll use the printer’s menus if you need to configure printer functions or get information
about current settings.
Note: You’ll only need to change the settings on the menus if you have specialized printing
or connection needs. The factory settings suit most users.
To see the menus, first press the On Line key to take the printer off line. Then press the
Menu key. Each time you press the Menu key you’ll see one of the main items. There’s a
full list of menu items later in this section.
When you are finished in the menu system, press the On Line key to leave the menu system
and place the printer back on line and ready to print.
Enter key
You use the Enter key:
• To see submenus.
“Press Enter…” appears in the display window to prompt you to press the Enter key
to see a submenu(s).
• To save changes when you change main menu or submenu settings.
After you make a change to a main menu setting or submenu setting, press the Enter
key to save the new setting. An asterisk (*) will appear in the display window to the
right of the setting to confirm that new setting has been saved.
• To find out which port is being used for the current print job.
Press the Enter key when the Elite 12ppm is processing a job (when the Comm LED is
flashing). The LCD display window shows the name of the interface port that is
receiving data.
+ and – keys
You use the + and – keys to move through main menu and submenu settings. You can use
these keys only when the printer is off line.