Gateway ALR 9200 - Manual (Page 100)

88 Maintaining and Troubleshooting the Gateway ALR 9200 Server
PCI Configuration Submenu
The PCI Configuration Menu contains selections that access other
submenus.
PCI Device, Embedded SCSI Submenu
This submenu provides three fields that allow you to control certain
characteristics of the embedded SCSI controllers. Table 14 lists the fields
and options.
Large Disk Access Mode LBA
CHS
Applies to IDE drives only; refers to the method
used to access the drive.
Most operating systems use logical block
addressing (LBA); some use cylinder head sector
(CHS). To verify the correct method, consult the
operating system documentation.
Pause Before Boot Enabled
Disabled Enables a five-second pause before booting the
operating system.
Advanced Chipset
Control N/A Enters submenu.
Table 14: PCI Device, Embedded SCSI Submenu
Field Options Description
Option ROM Scan Enabled
Disabled Enables the option ROM scan of the
selected device.
Enable Master Disabled
Enabled Enables the selected device as a PCI bus
master.
Latency Timer Default
0020h
0040h
0060h
0080h
00A0h
00C0h
00E0h Defines the minimum guaranteed time, in
units of PCI bus clocks, that a device can
be master on a PCI bus. Typically, option
ROM code overwrites the value set by the
BIOS.
Table 13: Advanced Menu (Continued)
Field Options Description
3424.boo Page 88 Wednesday, September 2, 1998 9:23 AM