Gateway ALR 9200 - Manual (Page 151)

Emergency Management Port Console 139
Reset the Server Remotely
Selecting Reset from the Action Menu generates the Reset dialog
(Figure 38) so that you can remotely reset the server with POST reset
options.
Figure 38: Reset Dialog
Options available in the dialog are:
• System Reset: Resets the server with the selected POST reset
options. This operation is not allowed if the server is configured in
restricted mode for EMP operations.
• Option Group: Sets the POST reset option that will be effective
after reset. The options are EMP active or BIOS redirection. The
default selection is EMP active.
• Cancel: Exits the dialog with no action taken.
• Help: Displays dialog-level help information.
3424.boo Page 139 Wednesday, September 2, 1998 9:23 AM