Gateway ALR 9200 - Manual (Page 164)

152 Maintaining and Troubleshooting the Gateway ALR 9200 Server
Using the Symbios SCSI Utility
The Symbios SCSI utility detects the SCSI host adapters on the system
board. Use the utility to:
• Change default values
• Check and/or change SCSI device settings that may conflict with
those of other devices in the server
Running the SCSI Utility
When this message appears on the monitor:
Press Ctrl-C to run SCSI Utility...
Press C TRL +C to run the utility. When it appears, choose the host adapter
that you want to configure.
3424.boo Page 152 Wednesday, September 2, 1998 9:23 AM