Gateway ALR 9200 - Manual (Page 99)

Setup Menus 87
Keyboard Features Submenu
In Table 12, the settable features of the keyboard controller are listed along
with the options.
Advanced Menu
You can make the selections listed in Table 13 on the Advanced Menu
itself. Refer to “PCI Configuration Submenu” on page 88, “I/O Device
Configuration Submenu” on page 89, and “Advanced Chipset Control
Submenu” on page 91 for information on the three other selections that
appear on the Advanced Menu.
Table 12: Keyboard Features Submenu
Field Options Description
Num Lock Auto
On
Off Selects the power on state for the
Num Lock key.
Key Click Disabled
Enabled Enables or disables key click.
Keyboard auto-
repeat rate 30, 26.7, 21.8, 18.5, 13.3, 10,
6, or 2 per second Selects the key repeat rate.
Keyboard auto-
repeat delay 1/4 sec
1/2 sec
3/4 sec
1 sec Selects the delay before the keys
begin to repeat.
Table 13: Advanced Menu
Field Options Description
Plug and Play OS No
Yes Select Yes if you are booting a Plug and Play-
capable operating system.
Reset Configuration
Data No
Yes Select Yes if you want to clear the system
configuration data during the next boot. The
system automatically resets to No during the next
boot.
PCI Configuration N/A Enters submenu.
I/O Device Configuration N/A Enters submenu.
Use Multiprocessor
Specification 1.1
1.4 Selects the version of the multiprocessor
specification to use. Some operating systems
require version 1.1 for compatibility reasons.
3424.boo Page 87 Wednesday, September 2, 1998 9:23 AM