Gateway ALR 9200 - Manual (Page 30)

18 Maintaining and Troubleshooting the Gateway ALR 9200 Server
ICMB Connector (J)
The intelligent chassis management bus (ICMB) connector allows the
connection of a system management component to monitor the chassis
characteristics including temperature, voltages, intrusion detection, and fan
speeds.
SMBus Connector (GG)
This connector supports an SMBus card that provides system management
functions.
F16 Expansion Connector (HH)
The F16 expansion connector allows you to connect a component to the
F16 bus which communicates between the memory and I/O controller
(MIOC) and the PCI expansion bridge (PXB).
External IPMB connector (JJ)
This connector allows you to connect an “external” device to the IPMB to
help determine the cause of a system failure from a remote terminal.
SMM connector (KK)
The SMM connector allows you to connect a system management module
to the system board to monitor the system and perform other system
management functions.
Back Panel I/O Connectors
Video Port Connector (L)
The onboard, integrated Cirrus Logic CL-GD5480 64-bit VGA chip
contains an SVGA controller that is fully compatible with the VGA video
standard. The system board provides 2 MB of 10 ns onboard video
3424.boo Page 18 Wednesday, September 2, 1998 9:23 AM