Gateway ALR 9200 - Manual (Page 149)

Emergency Management Port Console 137
Connect to Remote Server
Select [Re]Connect from the Connect menu and follow the Connect dialog
shown in Figure 36 allows you to connect to a selected server. If the client
machine is already connected to a server, initiating connection generates a
warning message. The message states that the existing connection will be
terminated if you continue trying to initiate the new connection. You are
prompted to enter the EMP password whenever a connection is attempted.
Figure 36: Connect Dialog
Options available in the dialog are:
• Line Selection: Allows distinction between direct or dial-up
modem connection to the server.
• Dial-up: Connects to a selected server with a modem.
• Direct connect (Serial Line): Connects to the selected server
directly using a null modem serial cable.
• Server: Displays a list of available servers in a dropdown edit list
box. You can select or enter a server name; a server must be
selected wen the line selection is dial-up.
• Serial Line: Must be filled out when the line selection is set to
direct connect (serial line).
• Baud Rate: Specifies baud rate; must be 19200 for EMP to
connect properly.
• COM Port No.: Sets the COM port number to which the null
modem serial cable is connected.
3424.boo Page 137 Wednesday, September 2, 1998 9:23 AM