Gateway ALR 9200 - Manual (Page 126)

114 Maintaining and Troubleshooting the Gateway ALR 9200 Server
Adding and Removing ISA Boards
Adding and removing boards through the RCA provides a way for the RCA
to run its conflict detection algorithms on the resources requested by the
boards. This alerts you to any possible problems with that particular board
in the current configuration.
1. Click Add ISA Board in the RCA window.
2. Specify the directory for the .CFG file.
3. Select the file and click OK .
1. Select a valid ISA board in the Devices section of the RCA window.
2. Click Remove ISA Board .
Modifying Resources
Modifying the resources of a device may be necessary to accommodate
certain operating systems, applications, and drivers. You may also need to
modify resources to resolve a conflict.
1. Highlight the device in the Devices section of the RCA window.
2. Press the spacebar or E NTER , or double-click on the entry.
This displays the functions of the selected device along with any
possible choices and the resources associated with those choices.
To Add an ISA Board
To Remove an ISA Board
To Modify Device Resources
3424.boo Page 114 Wednesday, September 2, 1998 9:23 AM