Gateway ALR 9200 - Manual (Page 96)

84 Maintaining and Troubleshooting the Gateway ALR 9200 Server
Setup Key Commands
Table 8 lists the keys commands available in Setup and what they do.
Special Display Items
Some items displayed on the screen do not behave as normal fields. These
items are either submenus or display-only fields. Table 9 provides more
information.
The rest of this section lists the features that display on screen after you
press
F 2 to enter Setup. Not all of the option choices are described, because
(1) a few are not user-selectable but are strictly informational, and (2) many
of the choices are relatively self-explanatory.
Table 8: Setup Key Commands
Function Key Command
Get general help F 1 or A TL +H
Move between menus
← →
Go to the previous item ¦ (colon)
Go to the next Item Ø (zero)
Change the value of an item + or -
Select an item or display a submenu E NTER
Leave a submenu or exit Setup E SC
Reset to Setup defaults F 9
Save and exit Setup F 10
Table 9: Special Display Items
When you see this: It means this:
On screen, an option is shown but
you cannot select it or move to that
field. You cannot change or configure the option in that
menu screen. Either the option is autoconfigured
or autodetected, or you must use a different Setup
screen, or you must use the SSU.
On screen, the phrase Press Enter
appears next to the option.
Press E NTER to display a submenu that is either a
separate full-screen menu or a pop-up menu with
one or more choices.
3424.boo Page 84 Wednesday, September 2, 1998 9:23 AM