Gateway ALR 9200 - Manual (Page 148)

136 Maintaining and Troubleshooting the Gateway ALR 9200 Server
• Mode: Either redirect or EMP, depending on whether the EMP has
control of the COM2 port.
• Line Status: Gives status information on the server connection.
For example, if a server is connected, the status bar says
“Connected.” Otherwise, the line is blank.
EMP Console Main Menu
• File
• Exit: Exits the EMP console
• Connect
• Disconnect: Disconnects the server connection.
• [Re]Connect: Raises the connect dialog.
• (A list of the five most recent connections): Initiates
connection to selected server.
• Action
• Power On/Off: Powers the server on or off with POST power-
up options.
• Reset: Resets the server with POST reset options.
• SEL Viewer: Opens the SEL viewer.
• SDR Viewer: Opens the SDR viewer.
• FRU Viewer: Opens the FRU viewer.
• Phonebook: Opens the phonebook dialog.
• Help: Provides version information and help topics for the EMP
console.
Server Control Operations
Three server control operations are available from the menu or toolbar of
the main EMP console window, remote server connection, powering the
server on and off, and resetting the server. The server console mode can
also be switched between EMP active and BIOS redirect modes through
POST power-up and reset options.
3424.boo Page 136 Wednesday, September 2, 1998 9:23 AM