Matrox Electronic Systems II - Manual (Page 13)

Matrox Meteor-II boards 13
dual-tap configurations. It also accepts an external trigger, and
can operate in either asynchronous reset mode or next valid
frame/field mode.
The PCI form factor also includes an auxiliary power supply
input, which can be used to draw auxiliary power from your
computer to provide power to your camera.
Matrox Meteor-II /Digital
Matrox Meteor-II /Digital is a digital frame grabber for
standard and non-standard video acquisition. This board is
only available in a PCI form factor.
VIA
VMChannel
PSG
UART
32
32
32
LUT
4 256x8-bit
or
2 4Kx16-bit
RS-232
Drivers
and
Receivers
RX
TX
/RTS
/CTS
RS-422/
LVDS*
Receiver
TTL
Buffers
Data
RS-422
Drivers
&
Receivers
/
LVDS*
Clk input
Clk output
Hsync input
Hsync output
Vsync input
Vsync output
Valid frames/line
Trigger
Exposure timer1
Exposure timer2
Aux 1 input
Aux 2 input
Aux 1 output
Camera CTRL1
Aux 2 output
Camera CTRL2
Camera CTRL3
Trigger
Opto-
coupler
Host 32-bit PCI bus
* Matrox Meteor-II is available with either RS-422 or LVDS support.
On separate bracket
Trigger
Exposure timer1
Exposure timer2
100-Pin
Connector
9-Pin Female
Trigger
Connector
9-Pin Male
Connector
RS-232
32
32
SGRAM
(4 MB)
64