Matrox Electronic Systems II - Manual (Page 86)

86 Appendix B: Technical information Matrox Meteor-II /Standard
Use Matrox cable DBHD44-TO-13BNC to interface with this
connector. The cable has thirteen BNC connectors, and a
high-density 44-pin D-Subminiature male connector. This cable
allows you to attach up to twelve analog video sources, and a
trigger input.
An open-ended version of this cable, the DH44-TO-13BNC/O,
is also available that can be used to access signals in addition
to those described above. Parts for cables can be purchased
from:
20 VID_IN9 I Analog Video Input #9 or Y5 PCI
21 RTS O Request To Send (RS-232). PCI, CompactPCI
22 RX I Receive (RS-232). PCI, CompactPCI
23 VID_IN8 I Analog Video Input #8 or Y4 PCI
24 USER(1)_OUT O Auxiliary User Output #1 PCI, CompactPCI
25-31 GND - Ground. PCI, CompactPCI
33 VID_IN11 I Analog Video Input #11 or Y6 PCI
34 OPTOTRIG- I Opto-Isolated trigger negative input. PCI, CompactPCI
35 OPTOTRIG+ I Opto-Isolated trigger positive input. PCI, CompactPCI
36 TX O Transmit (RS-232). PCI, CompactPCI
39 USER(1)_IN I Auxiliary User Input #1 PCI, CompactPCI
40 VID_IN7 I Analog Video Input #7 or C3 PCI, CompactPCI
41 VID_IN6 I Analog Video Input #6 or Y3 PCI, CompactPCI
42 GND - Ground. PCI, CompactPCI
43 VID_IN4 I Analog Video Input #4 or C2 PCI, CompactPCI
44 VID_IN2 I Analog Video Input #2 or C1 PCI, CompactPCI
7, 10,
12, 32,
37, 38 Not used PCI, CompactPCI
Pin Signal I/O Description Form
Factor
■
Manufacturer: NorComp Interconnect Devices
■
Connector & shell: HDT44P