Matrox Electronic Systems II - Manual (Page 34)

34 Chapter 2: Hardware installation
Connecting a video input to Meteor-II /Standard for PCI
or CompactPCI
You can connect video sources to Matrox Meteor-II /Standard’s
video input connector, using the optional DBHD44-TO-13BNC
cable. This cable has thirteen BNC connectors and a 44-pin
high-density D-Subminiature plug. The wires of the cable are
color-coded as follows. Connect your cameras accordingly.
VMChannel
Connector 1 (male) for
expansion module
Connector 2 (female) for
expansion module
Video input
Auxiliary power supply
input
BNC
Wires Signals Expected Input Form factor
RED (1) VID_IN1 Analog Video Input1 or Y1 PCI, CompactPCI
GREEN (2) VID_IN2 Analog Video Input2 or C1 PCI, CompactPCI
BLUE (3) VID_IN3 Analog Video Input3 or Y2 PCI, CompactPCI
BLACK (4) VID_IN4 Analog Video Input4 or C2 PCI, CompactPCI
WHITE (5) VID_IN5 Analog Video Input5 or C4 PCI, CompactPCI
YELLOW (6) VID_IN6 Analog Video Input6 or Y3 PCI, CompactPCI
PURPLE (7) VID_IN7 Analog Video Input7 or C3 PCI, CompactPCI