Bnc connector, Auxiliary power supply input – Matrox Electronic Systems II User Manual
Page 90
90 Appendix B: Technical information Matrox Meteor-II /Standard
* N/C = Not connected. This means that the pin might be
defined as part of the VMChannel interface standard but it is
not used on the Matrox Meteor-II /Standard board.
BNC connector
The BNC connector provides a single composite input to the
Matrox Meteor-II /Standard board. Its pin assignments are as
follows:
■
1: composite 1 or VID_IN1.
■
2 (SHELL): ground.
You can use a standard video cable (available from your local
electronic store) to interface with this connector.
Auxiliary power supply input
The auxiliary power supply input connector is a standard 4-pin
male connector that routes power from the computer to a
camera (via the DB-44). Use the 4-pin power cable provided
with your board to connect to the power supply of your
computer. The operating current is 1.5 A with an
auto-resettable fuse. Note that this input is not available on the
CompactPCI and PC/104-Plus form factors.
27
DATA[22]
61
DATA[23]
28
DGND
62
DATA[24]
29
DATA[25]
63
DGND
30
DATA[26]
64
DATA[27]
31
DGND
65
DATA[28]
32
DATA[29]
66
DGND
33
DATA[30]
67
DATA[31]
34
DGND
68
SBN
Pin
Signal
Pin
Signal
2
1
1
2
3
4