Matrox Electronic Systems II - Manual (Page 97)

Board input and output connectors 97
Use Matrox cable DBHD44-TO-8BNC to interface with this
connector. It has eight BNC connectors and a high-density
44-pin D-Subminiature male connector. This cable allows you
to attach up to six video sources, an analog sync, and a trigger
input.
An open-ended version of this cable, the DH44-TO-8BNC/O, is
also available and can be customized to access signals in
addition to those described above. For customers planning to
build their own cable, parts can be purchased from:
2 HSYNC_TTL Hsync input or output (TTL).
38 EXP(1) Exposure #1 output (TTL).
23 EXP(2) Exposure #2 output (TTL).
36 TX Transmit (RS-232).
22 RX Receive (RS-232).
6 CTS CTS (RS-232).
21 RTS RTS (RS-232).
39 USER1IN+ Auxiliary User Input #1 (positive).
12 USER1IN- Auxiliary User Input #1 (negative).
9 USER2IN+ Auxiliary User Input #2 (positive).
10 USER2IN- Auxiliary User Input #2 (negative).
24 USER1OUT Auxiliary User Output #1 (TTL).
8 USER2OUT Auxiliary User Output #2 (TTL).
1, 16 DC POWER +12 V OR +5 V Power Supply.
7, 37 NC Not connected on
METEOR-II/Multi-Channel.
3-5, 14,
17-18,
25-31,42 GND Ground.
■
Manufacturer: NorComp Interconnect Devices
■ Connector: HDT44P
Pin Signal Description