Multi-Tech Systems ISIHP-2U - Manual (Page 102)

102 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Modem AT Commands & S-Registers
4 ERROR Error in command line (too many, or
invalid characters).
5 CONNECT 1200 Modem detected carrier at 1200 bps
and gone online.
6 NO DIALTONE No dial tone detected.
7 BUSY Busy signal detected.
8 NO ANSWER The remote system did not answer.
10 CONNECT 2400 Modem detected carrier at 2400 bps
and gone online.
11 CONNECT 4800 Modem detected carrier at 4800 bps
and gone online.
12 CONNECT 9600 Modem detected carrier at 9600 bps
and gone online.
13 CONNECT 14400 Modem detected carrier at 14400 bps
and gone online.
14 CONNECT 19200 Modem detected carrier at 19200 bps
and gone online.
24 CONNECT 7200 Modem detected carrier at 7200 bps
and gone online.
25 CONNECT 12000 Modem detected carrier at 12000 bps
and gone online.
86 CONNECT 16800 Modem detected carrier at 16800 bps
and gone online.
40 CONNECT 300 Modem detected carrier at 300 bps
and gone online.
55 CONNECT 21600 Modem detected carrier at 21600 bps
and gone online.
56 CONNECT 24000 Modem detected carrier at 24000 bps
and gone online.
57 CONNECT 26400 Modem detected carrier at 26400 bps
and gone online.