Multi-Tech Systems ISIHP-2U - Manual (Page 32)

Software/Driver Installation (Windows NT)
32 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
12. After the bindings have been reviewed and stored, the message
below appears, click Yes.
After re-booting, the ISI Cards icon appears in the Control Panel.
icon
You are now ready to configure the terminal adapter. See the
section,“Configuring the Terminal Adapter,” on page 49.
I/O Addresses and IRQ Codes
Unlike many modem products, the ISIHP has no DIP switch for I/O
addresses and no jumper to determine the IRQ code. The input/output
address and the interrupt request code (IRQ) for the ISIHP are
assigned automatically during driver installation. During any
subsequent re-cofiguring of your PC, you may need to know the
assigned I/O address and IRQ code. To determine the I/O address
and IRQ assigned to the ISIHP: