Multi-Tech Systems ISIHP-2U - Manual (Page 148)

148 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Regulatory Information
Regulatory Agency Information
FCC Part 68 Telecom
1. This equipment complies with part 68 of the Federal
Communications Commission Rules. On the outside surface of this
equipment is a label that contains, among other information, the
FCC registration number. This information must be provided to the
telephone company.
2. As indicated below, the suitable jack (Universal Service Order
Code connecting arrangement) for this equipment is shown. If
applicable, the facility interface codes (FIC) and service order
codes (SOC) are shown.
3. An FCC compliant telephone cord and modular plug is provided
with this equipment. This equipment is designed to be connected to
the telephone network or premises wiring using a compatible
modular jack that is Part 68 compliant. See installation instructions
for details.
4. If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuanace of service may be required. If advance notice is
not practical, the telelphone company will notify the customer as
soon as possible.
5. The telephone company may make changes in its facilities,
equipment, operation, or procedures that could affect the operation
of the equipment. If this happens, the telephone company will
provide advance notice to allow you to make necessary
modifications to maintain uninterrupted service.
6. If trouble is experienced with this equipment (the model of which is
indicated below), please contact Multi-Tech Systems, Inc. at the
address shown below for details of how to have repairs made. If the
equipment is causing harm to the network, the telephone company
may request you to remove the equipment form t network until the
problem is resolved.
7. No repairs are to be made by you. Repairs are to be made only by