Multi-Tech Systems ISIHP-2U - Manual (Page 33)

Software/Driver Installation (Windows NT)
MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 33
(for Windows NT) click on Start, Settings, Control Panel and select
the ISI Cards icon; or click on Start, Programs, Administrative
Tools (Common), Windows NT Diagnostics, Resources;
(for Windows 95) click on Start, Settings, and Control Panel. From
the Control Panel, click on System icon and then the Device
Manager tab. From there, click on the Computer icon at the top
of the Device Manager window. The Computer Properties
dialog box will appear. In the View Resources tab, click on either
the Interrupt Request (IRQ) or Input/Output (I/O) radio buttons
to view lists of both the IRQs and I/O memory addresses in use in
the computer and what devices are currently using these resources.
Removing ISIHP Card and Driver in Windows
NT 3.51/4.0
1. Click Start, Settings, Control Panel, and then double-click
Network.
2. The Network dialog box appears. Click the Adapters tab.
3. Select Multi-Tech PCI ISI Card, and then click Remove.
Note: To complete an uninstall, reboot your system.