Multi-Tech Systems ISIHP-2U - Manual (Page 34)

Software/Driver Installation (Windows 95/98)
34 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Installing the ISIHP in Windows 95 and Windows 98
This section describes how to install the ISIHP in systems operating
Microsoft Windows 95 or Windows 98 to use with a Remote Access
Service (RAS) server and other communications/fax server type
applications.
Windows 95 Installation
1. After installing the ISIHP in an available PCI slot, turn on the
computer.
2. Windows 95 automatically detects the ISIHP card. A dialog box
appears saying that Windows has found the new hardware and is
locating the software for it.
3. The Update Device Driver dialog box appears. Insert the ISIHP
Windows 95 driver diskette and click Next.
4. Windows 95 automatically searches for the unknown device and
locates the MultiTech ISI Port. After the operating system goes
through this process for every port added, click Finish.