Multi-Tech Systems ISIHP-2U - Manual (Page 113)

MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 113
Terminal Adapter AT Commands & S-Registers
originate data calls. This is useful for applications where
a specific port is for dial-out only.
Usage: !ENn
Function: Enable Data DN/MSN n
Values: n=1 (enable Data DN/MSN 1),
n=2 (enable Data DN/MSN 2)
Default: All ports are enabled by default
Description: !ENn enables a Data DN/MSN which will
put it back in service for accepting and originating data
calls.
*!N1=n DN 1
Sets the Modem Directory Number /Multiple Subscriber Number (Modem
DN/MSN) for modem ports 1 and 2. TheModem DN/MSN is a number
assigned to the BRI at subscription time by the ISDN service provider. The
Modem DN/MSN is a string of up to 25 characters; valid characters are 0-9,
the * character, and the # character. If used as an MSN, a subaddress can be
added to the number (if one is needed) by using the : character followed by
the subaddress number.”
*!N1=n sets the Modem DN/MSN for port 1
*!N2=n sets the Modem DN/MSN for port 2
Usage: *!N1=n
Function: Modem DN/MSN 1
Values: n=25-character string
Default: null string
Description: Modem DN/MSN 1 can be set to the same
value as Modem DN/MSN 2 and it can also be set to the
same value as Data DN/MSN 1 and/or 2. A call accepted
by Modem DN/MSN 1 will be routed to the first modem.
Usage: *!N2=n
Function: Modem DN/MSN 2
Values: n=25-character string
Default: null string
Description: Modem DN/MSN 2 can be set to the same
value as Modem DN/MSN 1 and it can also be set to the