Miller Electric ProHeat 35 - Manual (Page 13)

OM-222 166 Page 7
SECTION 3 − DEFINITIONS
3-1. Warning Label Definitions
Warning! Watch Out! There are
possible hazards as shown by the
symbols.
1
Electric shock from wiring can
kill.
1.1 Wear dry insulating gloves.
Do not wear wet or damaged
gloves.
1.2 Disconnect input plug or
power before working on
machine.
2 Induction heating can cause
injury or burns from hot items
such as rings, watches, or
parts.
2.1 Do not wear metal jewelry and
other metal personal items
such as rings and watches
during operation.
2.2 Do not touch hot parts or hot
head/coil.
3 Induction heating sparks can
cause fire. Do not overheat
parts and adhesives.
3.1 Keep flammables away from
heating operation. Do not heat
near flammables.
3.2 Heating sparks can cause
fires. Have a fire extinguisher
nearby and have a
watchperson ready to use it.
4 Breathing heating fumes can
be hazardous to your health.
Read Material Safety Data
Sheets (MSDSs) and
manufacturer’s instructions for
material used.
4.1 Keep your head out of the
fumes.
4.2 Use forced ventilation or local
exhaust to remove the fumes.
4.3 Use ventilating fan to remove
fumes.
5 Always wear safety glasses
or goggles during and around
heating operations to prevent
possible injury.
5.1 Wear either safety glasses or
full goggles depending on
type of operation and nearby
processes.
6 Do not remove or paint over
(cover) the label.
7 Become trained and read the
instructions before working on
the machine or heating.
190 025