Miller Electric ProHeat 35 - Manual (Page 17)

OM-222 166 Page 11
4-2. Selecting A Location
1 Lifting Eye
2 Lifting Forks
Use lifting eye or lifting forks to
move unit.
If using lifting forks, extend forks
beyond opposite side of unit.
3
Rating Label (Non CE Models
Only)
Use rating label to determine input
power needs. Label located under
front access door.
4
Plate Label (CE Models Only)
Label located under power switch.
5
Rating Label (CE Models
Only)
Use rating label to determine input
power needs.
6
Line Disconnect Device
Locate unit near correct input
power supply.
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
3
6
18 in
(460 mm)
18 in
(460 mm)
OR
1
2
Movement
Location And Airflow
4
5
803 992-B
12 in
(305 mm)
12 in
(305 mm)
4-3. Tipping
! Do not move or operate unit
where it could tip.