Intel 80960HD - Manual (Page 15)

80960HA/HD/HT
Datasheet 15
3.1 Pin Descriptions
This section defines the 80960Hx pins. Table 6 presents the legend for interpreting the pin
descriptions in Table 7 . All pins float while the processor is in the ONCE mode, except TDO,
which may be driven active according to normal JTAG specifications.
Table 6. Pin Description Nomenclature
Symbol Description
I Input only pin.
O Output only pin.
I/O Pin may be input or output.
- Pin must be connected as indicated for proper device functionality.
S(E)
Synchronous edge sensitive input. This input must meet the setup and hold times relative to
CLKIN to ensure proper operation of the processor.
S(L)
Synchronous level sensitive input. This input must meet the setup and hold times relative to
CLKIN to ensure proper operation of the processor.
A(E) Asynchronous edge-sensitive input.
A(L) Asynchronous level-sensitive input.
H(...)
While the processor bus is in the HOLD state (HOLDA asserted), the pin:
H(1) is driven to V
CC
H(0) is driven to V
SS
H(Z) floats
H(Q) continues to be a valid output
B(...)
While the processor is in the bus backoff state (BOFF asserted), the pin:
B(1) is driven to V
CC
B(0) is driven to V
SS
B(Z) floats
B(Q) continues to be a valid output
R(...)
While the processor’s RESET pin is asserted, the pin:
R(1) is driven to V
CC
R(0) is driven to V
SS
R(Z) floats
R(Q) continues to be a valid output