Troubleshooting – JVC GET0602-001A User Manual

Page 122

Advertising
background image

52

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
• For operations with the external components, refer also to the instructions supplied with the adapters used for the

connections (as well as the instructions supplied with the external components).

• Messages (enclosed in “ ”) in the tables below are shown in the language selected on <Language>. (

13)

Messages described here are in the language of this manual.

Symptom

Remedy/Cause

General

• No sound comes out of the speakers. • Adjust the volume to the optimum level.

• Check the cords and connections.

• The screen is not clear and legible.

Sunshine from the windshield may cause this symptom.
Adjust <Bright>. (

12)

• “Position Error Push Open Key”

appears on the screen.

The monitor panel angle has been forcibly adjusted, or its
adjustment has been interrupted while opening or closing.
Press [OPEN/TILT].

• “Mecha Error Push Reset” appears on

the screen, and the panel does not
move.

Reset the unit. (

3)

• “No Signal” appears.

• Change the source.
• Start the playback on the external component connected to

VIDEO IN jack.

• Check the cords and connections.
• Signal input is too weak.

• The buttons on the monitor panel do

not work.

When the monitor panel is open, only VOL +/– and

work. The other buttons do not function.

• The unit does not work at all.

Reset the unit. (

3)

• The touch panel does not respond

properly.

• <Illumination> function does not

work properly.

• Keep your hands and the touch panel clean and dry.
• Eliminate static electricity and do not place magnetic items

near the unit.

• Leave the unit until the temperature becomes stable in the

car.

• A rubber mat on the floor may cause this symptom. In this

case, do not use the rubber mat.

TUNER

• SSM automatic presetting does not

work.

Store stations manually. (

21)

• Static noise while listening to the

radio.

Connect the antenna firmly.

EN52-59_KW-AVX726_001A_3.indd 52

EN52-59_KW-AVX726_001A_3.indd 52

12/10/08 11:34:01 AM

12/10/08 11:34:01 AM

Advertising