JVC GET0602-001A - Manual (Page 95)

25 AV MENU
Menu item Selectable setting/item
Special Device Only for “NEW DEVICE.”
Select a device you want to connect from the list of Bluetooth devices which require
some special procedure to establish the Bluetooth connection. Then, use <Open> or
<Search> to connect.
• Once the connection is established, it is registered in the unit. You can connect the unit
and the device by using <Connect> the next time.
Connect Only for the registered devices.
Select a device from the list of registered devices, establish the connection with it.
Disconnect Only for the connected devices.
Disconnect the current device before connecting another device.
Delete Pairing Only for the registered devices.
Press <Yes> to confirm delete the registered devices.
Settings
Initial: Underlined Auto Connect * 4 When the unit is turned on, the connection is established
automatically with...
♦ Off
♦ Last
♦ Order
: No Bluetooth device.
: The last connected Bluetooth device.
: The available registered Bluetooth device found
first.
Auto Answer * 5 ♦ Off
♦ On
♦ Reject
: The unit does not answer the calls automatically.
Answer the calls manually.
: The unit answers the incoming calls
automatically.
: The unit rejects all incoming calls.
Message Info * 5 ♦ Auto
♦ Manual
: The unit informs you of the arrival of a message
by ringing and displaying “Receiving Message.”
To read the message,
37.
: The unit does not inform you of the arrival of a
message.
MIC Setting * 5 Adjust the volume of the microphone connected to the Bluetooth
adapter.
♦ 01/02/03
Version The Bluetooth software and hardware versions are shown.
* 4 Selectable only for “ Bluetooth PHONE.”
* 5 Only for the cellular phone connected for “ Bluetooth PHONE.” Not selectable when “NEW DEVICE” is selected.
EN18-25_KW-AVX726_001A_3.indd 25 EN18-25_KW-AVX726_001A_3.indd 25 12/10/08 10:08:26 AM 12/10/08 10:08:26 AM