Installation, Installation (in-dash mounting), Before installing the unit – JVC GET0602-001A User Manual

Page 132: When installing the unit in a nissan car

Advertising
background image

2

160

91.3

100

30˚

Dashboard

20

4

INSTALLATION (IN-DASH MOUNTING)

The following illustration shows a typical installation. However, you should make adjustments
corresponding to your specific car. If you have any questions or require information regarding installation
kits, consult your JVC car audio dealer or a company supplying kits.
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.

Before installing the unit

• When mounting the unit, be sure to use the screws provided, as instructed. If other screws are used,

parts could become loose or damaged.

• When tightening screws or bolts, be careful not to pinch any connection cord.
• Make sure not to block the fan on the rear to maintain proper ventilation when installing the unit.

1

Remove the audio system originally installed in the car, together with its mounting brackets.

Note:

Be sure to keep all the screws and parts removed from your car for future use.

2

Attach the mounting brackets (removed from the car), to this unit (see below).

3

Do the required electrical connections.

• See pages 3 – 6.

4

Install this unit using the screws removed in step

1

.

The following example is for installation in a Toyota car. For more details, consult your JVC car audio
dealer.

If necessary, restore the protruding tabs.

Supplied screws

Note :

When installing the unit on the mounting bracket, make sure to use the supplied screws
(M5 × 8 mm). If longer screws are used, they could damage the unit.

M5 × 8 mm

.

JVC


1

2

(

)

(

)

3

3

6

4

1

Toyota

JVC

When installing the unit in a Nissan car

Install the unit at an angle of less than 30˚, taking it into account that the monitor would eject
when in use.

30˚

Required space for installation and the monitor ejection

Unit: mm

mm

Mounting bracket removed from the car

Screws removed from the car in step

1

1

Supplied screws

Select the appropriate type fitting to your audio
system space.

Mounting bracket removed from the car

Plate for use with a Nissan car

CT_Instal_KW-AVX726[UT]2.indb 2

CT_Instal_KW-AVX726[UT]2.indb 2

08/12/25 16:33:12

08/12/25 16:33:12

Advertising