JVC GET0602-001A - Manual (Page 39)

39 EXTERNAL DEVICES
ENGLISH
Continued on the next page
When a call comes in...
The source is changed to “ Bluetooth PHONE”
automatically.
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
(
28)
When <Auto Answer> is deactivated...
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
or VOL +/–).
Using the Bluetooth cellular phone
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
or VOL +/–).
• You can adjust the microphone volume, 28.
To make a call, use <Dial Menu>. ( 26)
~
Press [SOURCE], then press [Bluetooth PHONE].
Ÿ
Press [ ].
!
Press [Bluetooth].
⁄
Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu). ( 26 – 28)
Name and phone number (if acquired)
FLAT
AM
3:00
SOURCE
Connected Device Name
Status of the device
• Signal strength/Battery remainder (only when
the information comes from the device).
[
5 / ∞]: Selects the
other registered device.
Connected device name
• When a cellular phone with audio function
is registered/connected, appears.
Activates < Voice Dialing >
function. (Hold)
Display < Dial Menu > screen.
• Appears on any source information screen
when the Bluetooth adapter is connected.
Bluetooth icon
• Lights up when the Bluetooth adapter
is connected.
EN38-49_KW-ADV792[J]3.indd 39 EN38-49_KW-ADV792[J]3.indd 39 12/22/08 9:56:41 AM 12/22/08 9:56:41 AM