JVC GET0602-001A - Manual (Page 58)

58
ENGLISH
Symptom Remedy/Cause
USB
• Noise is generated. The track played back is not a playable file format. Skip to
another file.
• Tracks cannot play back as you have
intended them to play.
Playback order may differ from the one played back using other
players.
• “Now Reading...” keeps flashing on
the screen.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy and folders.
• Turn off the power then on again.
• “Cannot play this device Check the
device” appears on the screen.
No tracks are stored. Copy tracks to the USB device.
• Correct characters are not displayed
(e.g. album name).
For available characters, 52.
• While playing a track, sound is
sometimes interrupted.
The tracks are not properly copied into the USB device. Copy
tracks again, and try again.
Bluetooth
• Bluetooth device does not detect the
unit.
This unit can be connected with one Bluetooth cellular phone
and one Bluetooth audio player at a time.
While connected to a device, this unit cannot be detected from
another device. Disconnect currently connected device and
search again.
• The unit does not detect the
Bluetooth device.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device.
• The unit does not make pairing with
the Bluetooth device.
• Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated on its
instructions, try “0000” or “1234.”
• Select the device name from <Special Device>, then try to
connect again. ( 28)
• Echo or noise occurs. Adjust the microphone unit (supplied with Bluetooth Adapter)
position.
• Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth
cellular phone.
• Move the car to place where you can get a better signal
reception.
• The sound is interrupted or skipped
while using a Bluetooth audio player.
• Reduce the distance between the unit and the Bluetooth
audio player.
• Disconnect the device connected for “Bluetooth PHONE.”
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the player
again.
• “NEW DEVICE” cannot be selected for
“Bluetooth AUDIO.”
Bluetooth audio player is already connected. To select “NEW
DEVICE,” disconnect it. (
27)
• The connected audio player cannot
be controlled.
Check whether the connected audio player supports AVRCP
(Audio Video Remote Control Profile).
EN56-63_KW-ADV792[J]3.indd 58 EN56-63_KW-ADV792[J]3.indd 58 12/22/08 9:55:53 AM 12/22/08 9:55:53 AM