JVC BR-HD50 - Manual (Page 19)

E-15
„ [BLANK/ P] button
• When BR-HD50 is in the STOP mode,
press this button to start blank search. It
searches the unrecorded part of the tape
and goes into the still mode.
(
XPage 54 “Blank search”)
• During the STOP or REC mode, the audio
recording level is decreased. (Pressing simul-
taneously with
Q or S button) (When “Q,
S” KEY FUNC. in the SYSTEM [1/2] Menu
screen is set to VAR/RECV)
(
XPage 44 “Adjusting audio recording
level”)
• When the setting screen is displayed, this
button is used to select the items or setting.
„ [SEARCH+/ S] button
• During normal display, the function of this
button can be selected using “ Q, S” KEY
FUNC. in the SYSTEM [1/2] Menu screen.
If it is set to VAR/RECV, the searching
speed increases if this button is pressed
during a search operation.
(
XPage 53 “Slow playback and Search
mode”)
If it is set to INDEX, press this button to
start forward index search. This function is
not effective during recording or recording
pause.
(
XPage 54 “Index search”)
• During the STOP or REC mode, CH2 is
selected as the channel for adjusting the
audio recording level. (When “
Q, S” KEY
FUNC. in the SYSTEM [1/2] Menu screen is
set to VAR/RECV)
(
XPage 44 “Adjusting audio recording
level”)
• When the setting screen is displayed, this
button is used to select items or setting dig-
its.
„ [SEARCH–/ Q] button
• During normal display, the function of this
button can be selected using “ Q, S” KEY
FUNC. in the SYSTEM [1/2] Menu screen.
If it is set to VAR/RECV, the searching
speed decreases if this button is pressed
during a search operation.
(
XPage 53 “Slow playback and Search
mode”)
If it is set to INDEX, press this button to
start reverse index search. This function is
not effective during recording or recording
pause.
(
XPage 54 “Index search”)
• During the STOP or REC mode, CH1 is
selected as the channel for adjusting the
audio recording level. (When “
Q, S” KEY
FUNC. in the SYSTEM [1/2] Menu screen is
set to VAR/RECV)
(
XPage 44 “Adjusting audio recording
level”)
• When the setting screen is displayed, this
button is used to return to the previous
menu or select setting digits.
„ [SET] button
• When the Menu screen, Date/Time setting
screen or the Multi Cue-up screen is dis-
played, press this button to confirm the set-
ting.
• In time code PRESET mode, press this but-
ton to preset the set time codes or user’s bit
to the time code generator.